HERMetic UTImeter Otex 25m portable level gauging equipment

HERMetic portable level gauging equipment

HERMetic UTImeter Otex 25m 
Part Number:TS MOUTI_PLSTD25BA
Tape 25m

The HERMetic UTImeter Otex is a portable liquid level gauge designed to be operated under open conditions on petroleum and chemical storage tanks where open gauging is permitted. The unit is used for custody transfer, inventory control measurement and free water detection on shore tanks. The HERMetic UTImeter Otex is set on the open gauging hatch.



The unit enables 3, optionally 4 measurements in one single operation:
• Ullage
• Temperature
• Oil-Water interface level
• Innage, Reference height (Visc version)

All HERMetic UTImeters are now equipped with the sensor “ ULTRA “ for use in low and high viscous liquids.The ULTRA sensing probe consists of a stainless steel tube terminated by a PEEK head. The sensing probe includes an ultrasonic liquid level sensor, a temperature sensor and a conductivity electrode. The sensitivity for ullage and interface measurement does not require any adjustment. The sensor is calibrated once at the factory and does not require subsequent calibration. The temperature transducer is a RTD element. The characteristics of the RTD element are stored inside the sensor. The sensor is sending true temperature values to the electronic box and display.

Low maintenance costs:

Fully modular unit. Change tape, sensor or instrument unit yourself.
Easy and detailed instructions in Operation and Service Manual.

Benefits

• 100% repeatability of measures.
• No adjustment of the sensitivity required.
• Small diameter.
• Chemically resistant to corrosive liquids (Chem version).
• High mechanical stability.
• No degradation of the sensitivity due to ageing of the sensor.
 

Technical specifications:

Accuracy of ullage-interface detection: ± 2 mm (± 0.08” approx.)

Ullage, interface indication: Audible and Visible selectable

Tape length: 15 m/50 ft, 30 m/100 ft, 35 m/115 ft

Tape graduation: Metric/English

Tape resolution: 1 mm / 1/16”