TS 14502 HERMetic UTImeter Gtex 2000 Tape 25m portable closed electronic level gauge

Portable closed electronic level gauge
HERMetic UTImeter Gtex 2000
TS 14502
Tape 25m

The HERMetic UTImeter Gtex 2000 is a portable electronic level gauge for closed gas tight operation resulting in increased safety and efficiency. 
The unit is used for temperature verification, inventory control measurement and free water detection on shore tanks. Connected to a  vapour control valve, the UTImeter Gtex 2000 avoids any gas release during operation and enables 4 measurements in one single operation, Ullage, Temperature, Oil-water interface level and detection of dip datum plate. By increasing safety and efficiency, Honeywell Enraf Tanksystem helps customers improve business performance.



HERMetic UTImeter Gtex 2000

The HERMetic UTImeter Gtex 2000 is a portable gas tight liquid level gauge designed to operate on top of closed petroleum and chemical tanks. The unit is used for verification of the fixed gauging system, temperature measurement, inventory control measurement and free water detection on shore tanks. Connected to a HERMetic vapour control valve fixed on the tank, the HERMetic UTImeter Gtex 2000 avoids any gas release during operation. 
The unit enables 4 measurements in one single operation:

1.Ullage 
2.Temperature 
3.Oil-Water interface level 
4.Innage, Reference height (manual detection of dip datum plate)


HERMetic UTImeter Gtex 2000

· with 2 Inch load on the sensing probe, recommended for operation in any kind of products. The weight of the probe permits a manual detection of the dip datum plate. 
· The unit is fitted with FFKM gaskets and tape connector for use in corrosive liquids.



ULTRA sensing probe 
Benefits: 
· Continuous temperature reading. 
· 100 % repeatability of measures. 
· High accuracy and stability. 
· Chemically resistant to corrosive liquids. 
· Easy access for battery exchange. 
· Sensor exchange without need of new calibration. 
· No temperature drift. No degradation of the sensitivity due to sensor ageing. 
· Tape cleaning devices, window wiper and tape protection on all units as standard. 
· Sensor fitted with load 500 gr. for high viscous products .
· Heavy sensor permits manual detection of dip/datum plate. Reference height measurement

Low maintenance cost: 
· Fully modular unit. Change tape, storage tube, sensor or instrument unit yourself. 
· Easy and detailed instructions in Operation and Service Manual.

 

TECHNICAL SPECIFICATIONS:

TS 14502 HERMetic UTImeter Gtex 2000

Accuracy of ullage-interface detection: ± 2 mm (± 0.08” approx.) 
Ullage, interface indication: Audible or Visible selectable 
Maximum tank overpressure: 0,3 bar (4,4 psi) 
Tape length: 30 m/100 ft 
Tape graduation: Metric/English 
Tape resolution: 1 mm / 1/16” 
Tape accuracy: ± 1.5 mm/30 m (±1/16”/100 ft approx.)
Meets API MPMS Chap 3.1A and ISO 4512 requirements 
Temperature accuracy: ± 0.1°C (0°C to 70°C); 
Meets API MPMS Chap 7 request  ± 0.2°F (32°F to 158°F)
Meets ISO 4268 , IP PMM Part IV

Ambient temperature range: -20°C to 50°C / (-4°F to 122°F) 
Temperature sensor measurement range: -40°C to 90°C / (-40°F to 194°F) 
Temperature measurement resolution: 0.01° or 0.1° selectable 
Temperature reading: °C or °F selectable 
LCD Display: 8 characters with backlight 
Power: Approved 9V batteries 
Weight with 30 meter / 100ft tape: 6.9 kg / 15.2 Lbs.
Hazardous environments approvals

ATEX   II 1 G EEx ia IIB T4 / Tamb 50°C 
Factory Mutual 
CL I, DIV 1, C&D, T4 Tamb 50°C and 
CL I, ZN 0, AEx ia IIB T4 Tamb 50°C 
China CQST: ExiaIIBT4