HERMetic Sampler GTN Chem closed sampler Honeywell TS 10092-35M

Closed sampler
HERMetic Sampler GTN Chem
TS 10092 - 35M
Tape 35m


The Honeywell  HERMetic Sampler GTN Chem (TS 10092) are designed for closed sampling of liquids or chemicals, which present a fire, health  or Airpollution Hazard. The gas tight construction of these units avoids a pressure release from the tank and exposure to fumes during operation.

The HERMetic Sampler GTN Chem sampler is ideal in the following cases:
○ If a representative sample of the content is required
○ For clean chemicals or refined products
○ If the sample has to avoid any contact with the atmosphere to maintain its specifications
○ If no gas release is permitted during sampling operation For connection on 2-inch HERMetic compact valves exclusively.

The gas tight construction of the sampler avoids pressure release from the tank and exposure to fumes during operation. The equipment is designed and certified for use in potentially explosive areas. It can be fitted with a specific sampling bottle, allowing zone, spot, running or bottom sampling.







For the HERMetic Sampler GTN Chem, the sample can be transfered under closed condition. This transfer garantees the integrity of the sample, since the liquid is never in contact with the atmosphere. A closed vapour recovery system dispatches the vapours back into the tank during transfer of the liquid into the laboratory bottle.
• The HERMetic Sampler GTN Chem can be purged with inert gas before and/or after sampling.
• The sampled liquid is never in contact with the atmosphere.
• The sampling height can be measured on the graduated tape.

HERMetic Sampler GTN Chem(TS 10092) Technical specifications:

Maximum tank overpressure :0,3 bar
Unit height:801 mm
Weight :7.5 kg
Tape length : 30m / 100 ft
Capacity of sampling bottle :Approx. 0.5 l
Capacity of laboratory bottle :0.47 l, 16 oz
Type of gaskets:FFKM
Materials:Stainless steel AISI 316, PTFE, PVDF
Hazardous environments approvals
ATEX II 1 G c IIB T6